108 hitch points and 9 pawls made of high strength treated steel.
3 groups of 36 hitch each obtaining 135 hitch points per revolution.
Extraction using ISIS bottom bracket extractor.
Standard thread of 1.37" x 24T.
New COMAS internal springs reinforced to increase reliability and accuracy.
Sealed bearings on both sides to prevent dust and dirt entering the mechanism.
Compatible with 1/8" and 3/32" chains.
Crown: Cr-Mo machined steel.
Body: Cr-Mo machined steel.
NO compatible with BB30 crankset.
NO compatible with cassette type cranks.
108 hitch points
Tooth width: 2.2mm
Total width: 17mm
Finished in black with COMAS graphics laser engraved.
It is advisable to make a preliminary run of the freewheel to eliminate excess grease from the mechanism and ensure the correct setting of the pawls. This process can be accelerated by introducing a little oil in the groove between the center of the freewheel and the teeth.
If the freewheel is used for Trial without having set the pawls first, it will not work properly and will cause it to jump, damaging the slot and the pawl.